The fashionable axe has survived just about unchanged from the primitive instrument that originated in prehistoric times. It basically consists of 2 elements – the axe head (made of metal) and the deal with (made of wood or fiberglass) and is mostly used for chopping or splitting timber. A few of the newer axes function a one-piece solid steel construction. A brief description of the principle parts of an axe is as follows. The chopping fringe of the head is called the bit or blade; the opposite finish is called the poll or butt. Each side of the head is called the cheek. The leading edge is beveled on both sides and is slightly curved. The handle or haft is mounted securely onto the head through an oval gap called the attention positioned close to the butt end. The deal with is typically oval in cross-part and ranges from 20 inches to 36 inches in length. The majority of the handle is referred to as the belly. The deal with bows slightly in toward the blade on the throat near the top to kind the grip. The very bottom of the handle is called the knob.
Axe or Hatchet?
A primary distinction is made between an axe and a hatchet. The much bigger axe is used for chopping timber and splitting lumber. A double bit axe has 2 chopping edges and is used mainly by skilled loggers. The smaller hatchet is designed for use with one hand.
Hatchet: Definition and Use
The hatchet is a lighter, more compact version of the axe. The butt finish of a hatchet sometimes takes the form of a hammer head and is used for driving nails. The head can also have a nail slot for pulling nails. It's appropriate for driving roofing nails and for cutting, splitting and putting in wood shakes or shingles. It's an important instrument for a roofer and is quite useful to a carpenter. It can also be used when camping and for light outside work.
Types of Axesgransfors bruks axes
could be sub-divided into the following categories: a felling axe, a broad axe and a splitting maul. Because the name implies, a felling axe is used for chopping towards the grain as when felling trees. A broad axe has a large head and a broad blade that's flat on one side and beveled on the other. In the past it has been used for hewing tough timber but has been rendered out of date by modern slicing tools. A splitting axe or splitting maul has a big heavy wedge-shaped head that's used for splitting wood along the grain. The maul works well with a boring blade and the butt finish can be utilized as a sledgehammer.
Never use an axe or a hatchet if the head just isn't securely fastened to the deal with or if the deal with is cracked. Don't strike the butt end of an axe with a hammer. Preserve the slicing fringe of the axe sharpened and rust-free. Consider the material near the grip of the axe handle. For those who think there may be slippage because of perspiration, you might need to wrap part of the handle with electrical tape.